Material Safety Data Sheet Condursal N9W:
Date Prepared: 03/01/2008 MSDS No: N9W
CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Identifier:
|
Condursal N9W
|
Product Description:
|
Stop-Off paint for Vacuum Carburizing
|
Manufacturer:
|
|
Emergency contact:
|
|
Emergency phone:
|
|
COMPOSITION/INFORMATION ON INGREDIENTS
Chemical characterization:
Mixture of the substances listed below with harmless additions
|
|
Wt.%
|
CAS Registry#
|
Xylene, mixture of isomers
|
25-30
|
1330-20-7
|
Xn; R 10-20/21-38
|
HAZARDS IDENTIFICATION
Hazard designation:
|
XN Harmful
|
Information pertaining to particular dangers for man and environment:
|
R 10 Flammable
|
R 20/21 Harmful by inhalation and in contact with skin.
|
R 38 Irritation to skin.
|
Classification system
|
The classification is in line with current EC lists. It is expanded, however, by information from technical literature and by information furnished by supplier companies.
|
FIRST AID MEASURES
General information:
|
Symptoms of poisoning may occur after several hours: therefore medical observation for at least 48 hours after accident. After inhalation Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
|
EYES:
|
Rinse opened eye for several minutes under running water. then consult a doctor.
|
SKIN:
|
Wash and rinse thoroughly with water and mild cleansing agent.
|
INGESTION:
|
Do NOT induce vomiting; instantly call for medical help.
|
INHALATION:
|
In case of unconsciousness bring patient to stable side position for transport.
|
FIRE FIGHTING MEASURES
Suitable extinguishing agents:
|
C02, sand, extinguishing powder. DO NOT USE WATER.
|
For safety reasons:
|
Unsuitable extinguishing agents:
|
Water with full water jet.
|
Protective equipment:
|
Put on breathing apparatus.
|
ACCIDENTAL RELEASE MEASURES
Person related safety precautions:
|
Wear protective equipment. Keep unprotected persons away.
|
Measures for environmental protection:
|
No special measures required.
|
Measures for cleaning and collecting:
|
Absorb with liquid binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose of contaminated material as waste according to item 13. Ensure proper ventilation Do not flush with water or aqueous cleansing agents.
|
HANDLING AND STORAGE
Handling:
|
Information for safe handling:
|
Ensure good ventilation/exhaust at the work place. Prevent formation of aerosols.
|
Information about protection against explosions and fires:
|
Keep ignition sources away - DO NOT SMOKE.
|
Requirements to be met by storerooms and containers:
|
No special requirements.
|
Information about storage in one common storage facility:
|
Store away from oxidizing agents.
|
Further information about storage conditions:
|
Keep container tightly sealed Store in cool, dry conditions in well sealed containers.
|
Storage class:
|
NA
|
Class according to regulation on inflammable liquids:
|
VOID
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Additional information about design of technical systems:
|
No further data; see item "HANDLING AND STORAGE".
|
Components with critical values that require monitoring at the work place:
|
1330-20-7
|
Xylene; mixture of isomers (35-50%)
|
ACGIH TLV
|
Short term value: 651 mg/m3, 150ppm
|
Long term value: 434 mg/m3, 100ppm
|
BEI
|
NIOSH REL
|
Short term value: 655 mg/m3, 150ppm
|
Long term value: 434 mg/m3, 100ppm
|
(o-, m-, & p- isomers)
|
OSHA PEL
|
435 mg/m3, 100ppm
|
Additional information:
|
The lists that were valid during the compilation were used as a basis.
|
Personal protective equipment:
|
General protective and hygienic measures:
|
Keep away from foodstuffs, beverages and food. Instantly remove any soiled and impregnated garments. Wash hands during breaks and at the end of the workday. Avoid contact with eyes and skin
|
Breathing equipment:
|
Not necessary if room is well ventilated.
|
Protection of hands:
|
Solvent resistant gloves.
|
Eye protection:
|
Safety glasses recommended during refilling.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form:
|
Paste
|
Color:
|
Light beige
|
Odor:
|
Characteristic
|
Change in condition:
|
Melting point:
|
Not determined
|
Boiling point:
|
>278° F
|
Flash point:
|
>45° F
|
Ignition temperature:
|
>750°F
|
Self-inflammability:
|
Product is not self igniting
|
Danger of explosion:
|
Product is not explosive. However, formation of explosive air/stream mixture is possible.
|
Critical values for explosion:
|
Lower:
|
1.1 Vol %
|
Upper:
|
7.0 Vol% (Solvent)
|
Steam pressure at 40°F:
|
8 hPa
|
Density at 40°F:
|
1.2-1.3 g/cm3 (DIN 53217)
| |
Solubility in/ Miscibility with water:
|
Not miscible or difficult to mix
|
Viscosity:
|
NA
|
Dynamic at 40°F:
|
400-6000 mPas (Brookfield)
|
Percent volatile:
|
25-35
|
Solvent content
|
Solvent content:
|
NA
|
Organic contents:
|
40-50%
|
Solids content:
|
50-60%
|
Additional information:
|
Values are average
|
STABILITY AND REACTIVITY
Thermal decomposition to be avoided:
|
No decomposition if used according to specifications.
|
Dangerous reaction:
|
No dangerous reactions known
|
Dangerous products of composition:
|
No dangerous decomposition products known.
|
TOXICOLOGICAL INFORMATION
Acute toxicity:
LD/LC50 Values that are relevant for classification:
1330-20-7 xylene, mixture of isomers
|
Oral:
|
LD50 >2000 mg/kg (rat)
|
Dermal:
|
LD50 >2000 mg/kg (rabbit)
|
Inhalative:
|
LC50/4 h >5 mg/kg (rat)
|
Eye effects:
|
Irritant effect
|
Skin effects:
|
Irritant for skin and mucous membranes
|
Sensitization:
|
No sensitizing effect known
|
Additional toxicological information:
|
The product shows the following dangers according to the calculation method of General EC Classification Guidelines for Preparation as issued in the latest version.
|
ECOLOGICAL INFORMATION
|
General notes:
|
Water hazard class 2 (Self Assessment): hazardous for water. Do not allow product to reach ground water, bodies of water or sewage system. Danger to drinking water if even small quantities leak into soil.
|
DISPOSAL CONSIDERATIONS
Product recommendations:
|
Must not be disposed of together with household garbage.
|
Un-cleaned packaging recommendation:
|
Disposal must be made according to official regulations.
|
TRANSPORT INFORMATION
DOT (Department of Transportation)
ADR/RID-GGVS/E Class
|
UN Number:
|
1263
|
Designation of goods:
|
Paint
|
Maritime transport IMDG/GGVSea
|
IMDG/GGVSea class:
|
3.3
|
Page:
|
3372
|
NA/UN number:
|
1263
|
Packing Group International (I.M.O.):
|
(III)
|
EMS Number:
|
3-05
|
MFAG
|
310
|
Maritime pollutant
|
No
|
Correct technical name:
|
Paint
|
Air transport ICAO-TI and IATA-DRG
|
ICAO/IATA Class
|
3
|
UN/ID Number
|
1263
|
Packaging group
|
(III)
|
Correct technical name
|
Paint Related Material
|
REGULATORY INFORMATION
Designation according to EC guidelines:
|
Observe the normal safety regulations when handling chemicals. The product is not subject to identification regulations under EC Directives and the Ordinance on Hazardous Materials (GefStoffV).
|
Code letter and hazard designation of product:
|
Xn Harmful
|
Hazard determining components of labeling:
|
Xylene, mixture of isomers.
|
Risk Phrases:
|
10
|
Flammable
|
20/21
|
Harmful by inhalation and in contact with skin
|
38
|
Irritation to skin
|
Safety phrases:
|
9
|
Keep container in well ventilated areas
|
25
|
Avoid contact with eyes
|
35
|
This material and its container must be disposed of in a safe way
|
43
|
In case of fire, use sand, carbon dioxide or powdered extinguishing agent. NEVER USE WATER
|
National regulations:
|
Classification according to VbF
|
VOID
|
Technical instructions (air) Class share in %
II 25-50:
|
Water hazard class
|
Water hazard class 2 (self assessment): hazardous for water.
|
OTHER INFORMATION
This data is based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
|
MANUFACTURER DISCLAIMER
This data is based on our present knowledge. However, they shall not constitute a guarantee for specific product features and shall not establish a legal valid contractual relationship.
|
|
