Material Safety Data Sheet CONDURSAL 710:
Date Prepared: 03/01/2008 MSDS No: 710
CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Identifier:
|
Condursal 710
|
Product Description:
|
Gas Carburizing and Carbonitriding Stop Off Paint
|
Manufacturer:
|
|
Emergency contact:
|
|
Emergency phone:
|
|
COMPOSITION/INFORMATION ON INGREDIENTS
|
Wt.%
|
CAS Registry#
|
Silicic acid, sodium salt
|
10-25
|
1344-09-8
|
HAZARDS IDENTIFICATION
Emergency overview:
|
Potential health effects:
|
EYES:
|
Irritating to eyes
|
SKIN:
|
Irritating to skin
|
FIRST AID MEASURES
EYES:
|
Immediately flush eyes with plenty of water. Get medical attention if irritation persists
|
SKIN:
|
Wash with soap and water
|
INGESTION:
|
If swallowed, do NOT induce vomiting. Call a physician
|
INHALATION:
|
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.
|
ADDITIONAL INFORMATION:
|
In case of contact, immediately flush skin with plenty of water, while removing contaminated clothing and shoes. Thoroughly wash or discard clothing and shoes before reuse.
|
FIRE FIGHTING MEASURES
Flashpoint And method:
|
NONE
|
Auto-ignition temperature:
|
NONE
|
FIRE FIGHTING EQUIPMENT:
|
No special measures required.
|
ACCIDENTAL RELEASE MEASURES
Large spill:
|
Prevent material from reaching sewage systems, holes and cellars.
|
General procedures:
|
Absorb with liquid binding materials (sand, acid binders, universal binders, and sawdust)
|
HANDLING AND STORAGE
General procedures:
|
Keep container closed to prevent drying out.
|
Handling:
|
Prevent formation of aerosols.
|
Storage:
|
Keep from freezing.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering controls:
|
No special ventilation requirements.
|
Personal protection:
|
EYES AND FACE: Wear safety glasses with side shields (or goggles) and face shield.
|
Work hygienic practices:
|
Keep away from food stuffs, beverages and food. Instantly remove any soiled and impregnated garments. Wash hands during breaks and at the end of work. Avoid contact with the eyes and skin.
|
PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
|
Liquid
|
Odor:
|
Characteristic
|
Color:
|
Red-Brown
|
pH:
|
11-13
|
Percent volatile:
|
Not Determined
|
Boiling point:
|
~ 100°C - 212°F
|
Melting point:
|
Not determined
|
Solubility in water:
|
Soluble
|
Comments:
|
pH: at 20 ° C
|
STABILITY AND REACTIVITY
Stable:
|
Yes
|
Hazardous polymerization:
|
No
|
Hazardous decomposition:
|
None IF USED ACCORDING TO SPECIFICATIONS.
|
TOXICOLOGICAL INFORMATION
Eye effects:
|
Strong irritant with the danger of severe eye injury.
|
Skin effects:
|
Irritant for skin and mucous membranes
|
Sensitization:
|
No sensitizing effect known
|
ECOLOGICAL INFORMATION
Environmental data:
|
Avoid run off into storm sewers and ditches, which lead to waterways.
|
General Comments:
|
Water hazard class 1 (self assessment): slightly hazardous for water.
|
DISPOSAL CONSIDERATIONS
Disposal method:
|
Must NOT be disposed of together with household garbage. DO NOT allow product to reach sewage system.
|
Empty container:
|
Disposal must be made according to official regulations.
|
TRANSPORT INFORMATION
DOT (Department of Transportation)
|
Hot hazard:
|
No
|
Combustible class:
|
No
|
REGULATORY INFORMATION
OTHER INFORMATION
APPROVAL DATE: 02/28/1999
Revision summary
NEW MSDS
HMIS CODES:
Fire: 0
Health: 2
Reactivity: 1
Protection: B
|
MANUFACTURER DISCLAIMER
This data is based on our present knowledge. However, they shall not constitute a guarantee for specific product features and shall not establish a legal valid contractual relationship.
|
|
