Condursal Stop Off Paints for the heat treating industry
0118CR
Condursal Stop Off Paints for the heat treating industry

Return to CONDURSAL 0118CR
Condursal Stop Off Paints for the heat treating industry
Material Safety Data Sheet CONDURSAL 0118CR:
Date Prepared: 03/01/2008 MSDS No: 0118CR

CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Identifier:
Condursal 0118CR
Product Description:    
Ion Nitriding Stop Off Paint
Manufacturer:
Emergency contact:
Emergency phone:


HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
NONE
Proprietary components:
Sodium silicate
Magnesium silicate
Tin and Tin oxide
Water


PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling point - Water based approximately:
212° F.
Specific gravity (H2O=1)
1.9
Vapor pressure (mm Hg.) from solvent at 68° F.
NA
Melting point:
572°F
Vapor density (AIR=1)
Like water
Evaporation rate (Butyl Acetate=1) Ether
Like water
Solubility in water
Miscible
Appearance and odor
Green color- paste like consistency-no order.


FIRE AND EXPLOSION HAZARD DATA
Flash point (method used) LEL UEL
Non Flammable
Extinguishing media
None
Special fire fighting procedures
None
Unusual fire and explosion hazards
None


REACTIVITY DATA
Stability
Stable
Conditions to avoid
Keep from freezing.
Incompatible materials
Strong minerals and organic acids.
Hazardous decomposition or byproducts
None as known.
Hazardous polymerization
Will not occur.


HEALTH HAZARD DATA
Routes of entry:
Inhalation:
Irritation
Skin:
Irritation
Ingestion:
Irritation
Health Hazards:
None under normal working conditions.
Signs and symptoms of exposure:
Can cause severe eye irritation. Redness, tearing and blurred vision. Can cause slight irritation to skin. Mist can cause irritation of nasal and respiratory passages. Ingestion can cause gastrointestinal irritation, nausea vomiting and diarrhea.
Emergency and first aid procedures
Eyes:
Flush and wash with large amounts of water.
Inhalation:
If swallowed, give two glasses of water, induce vomiting and call physician.
Skin:
If illness occurs remove patient to fresh air, keep quiet and warm. Call physician immediately.


PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be taken in case of material release or spill:
Wash with water and wipe up.
Waste disposal method:
Dry and dispose per state and federal regulations. Main components of residuals are silicates, Tin oxide and CR203
Precautions to be taken in handling and storing:
tore at normal temperatures: prevent from freezing. Do not store in containers made f Zinc or Aluminum.
Other precautions:
None


CONTROL MEASURES
Respiratory protection:
Not necessary under normal working conditions
Ventilation:
Local exhaust
Recommended if residues are removed with steel brush after heat treating.
Protective gloves:
Recommended
Alkali proof type.
Eye protection:
Recommended
Not necessary under normal working conditions.
Other protective clothing or equipment:
None
Work/Hygienic practices:
This product is based on sodium silicates; same precautions should be taken as with caustic solutions.


Click Here To Order

Return to CONDURSAL 0118CR