Material Safety Data Sheet CONDURSAL 0090:
Date Prepared: 03/01/2008 MSDS No: 0090
CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Identifier:
|
Condursal 0090
|
Product Description:
|
Gas Carburizing and Carbonitriding Stop Off Paint
|
Manufacturer:
|
|
Emergency contact:
|
|
Emergency phone:
|
|
COMPOSITION/INFORMATION ON INGREDIENTS
|
Wt.%
|
CAS Registry#
|
Xylenes (o-,m-p- isomers)
|
25
|
1330-20-7
|
Boron Oxide
|
50
|
13303-86-2
|
Acrylic resin
|
25
|
|
HAZARDS IDENTIFICATION
Emergency overview:
|
Immediate concerns:
|
FLAMMABLE
|
Potential health effects:
|
EYES:
|
Irritating to eyes
|
SKIN:
|
Irritating to skin
|
INHALATION:
|
Harmful by inhalation and in contact with skin
|
FIRST AID MEASURES
EYES:
|
Immediately flush eyes with plenty of water. Get medical attention if irritation persists
|
SKIN:
|
Wash with soap and water
|
INGESTION:
|
If swallowed, do NOT induce vomiting. Call a physician
|
INHALATION:
|
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.
|
FIRE FIGHTING MEASURES
Flashpoint And method:
|
75° F. 24°C TAG CC
|
Flammable limits:
|
1.1 Vol. % to 7.0 Vol. %
|
Auto-ignition temperature:
|
932° F 500°C
|
Extinguishing media
|
In case of fire, use CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.
|
ACCIDENTAL RELEASE MEASURES
Large spill:
|
Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust.
|
Environmental precautions:
|
WATER SPILL Do not flush to sewer.
|
General procedures:
|
ENSURE ADEQUATE VENTILATION
|
Special protective equipment:
|
Wear protective equipment. Keep unprotected persons away.
|
HANDLING AND STORAGE
General procedures:
|
Store in a tightly closed container.
|
Handling:
|
Use with adequate ventilation.
|
Storage:
|
Store in a cool place in original container and protect from sunlight.
|
Electrostatic accumulation hazard:
|
Keep away from heat, sparks and flame. Do not smoke. Protect against electrostatic charges.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering controls:
|
Local exhaust ventilation may be necessary to control any air contaminants to within their TLV’s during the use of this product.
|
Personal protection:
|
EYES AND FACE: Wear safety glasses with side shields (or goggles) and face shield.
|
Work hygienic practices:
|
Keep away from foodstuffs, beverages and food. Instantly remove any soiled and impregnated garments. Wash hands during breaks and at the end of work. Avoid contact with the eyes and skin.
|
PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
|
Liquid
|
Odor:
|
Characteristic
|
Appearance:
|
Pasty
|
Color:
|
Black
|
pH:
|
Not determined
|
Percent volatile:
|
25-25
|
Boiling point:
|
~ 137°C - 278°F
|
Melting point:
|
Not determined
|
Solubility in water:
|
Not soluble
|
STABILITY AND REACTIVITY
Stable:
|
Yes
|
Hazardous polymerization:
|
No
|
Hazardous decomposition:
|
None IF USED ACCORDING TO SPECIFICATIONS.
|
Incompatible materials:
|
Water
|
TOXICOLOGICAL INFORMATION
Eye effects:
|
Irritant effect
|
Skin effects:
|
Irritant for skin and mucous membranes
|
Sensitization:
|
No sensitizing effect known
|
ECOLOGICAL INFORMATION
Environmental data:
|
Avoid run off into storm sewers and ditches, which lead to waterways.
|
General Comments:
|
Danger to drinking water, even if small quantities leak into soil
|
DISPOSAL CONSIDERATIONS
Disposal method:
|
Must NOT be disposed of together with household garbage. DO NOT allow product to reach sewage system.
|
Empty container:
|
Disposal must be made according to official regulations.
|
TRANSPORT INFORMATION
DOT (Department of Transportation)
|
Proper shipping name:
|
Flammable liquids, N.O.S.
|
Technical name:
|
PAINT RELATED MATERIAL
|
Hot hazard:
|
No
|
Hazard class:
|
3
|
NA/UN number:
|
UN1263
|
Packing Group International (I.M.O.):
|
3 (III)
|
Proper shipping name:
|
Flammable liquids, N.O.S.
|
ADR/RID hazard classification AIR (I.CA.O.):
|
3
|
REGULATORY INFORMATION
OTHER INFORMATION
APPROVAL DATE: 02/21/2002
Revision summary
Revision #: 1
This MSDS replaces the January 1, 1999 MSDS. Any changes in information are as follows:
In section 1
Manufacturer Name
In section 6
Special protective equipment
In section 7
Electrostatic accumulation hazard
In section 8
Work Hygienic practices
In section 9
Odor
HMIS Codes
Fire: 3
Health: 2
Reactivity: 1
Protection: B
|
MANUFACTURER DISCLAIMER
This data is based on our present knowledge. However, they shall not constitute a guarantee for specific product features and shall not establish a legal valid contractual relationship.
|
|
